Falstaff
Miembro habitual
- Mensajes
- 202
- Reacciones
- 0
DENON A1HD System (AVP-A1HD/POA-A1HD)
Esta sería la combinación perfecta, segun DENON, para un procesador+ etapa AV multicanal, es grande en imagen y en precio. Si nos podemos gastar los 14000 euros que dicen que cuesta, seguramente le sacaremos partido.
No se si el maestro Kores habrá tenido oportunidad de probarlo, pero espero que de su opinión sobre este y otros "aparatejos" del apartado sonido.
las características han sido sacadas de Supersonido.
AVP-1HD
• All new circuit layouts that shorten audio and video signal paths for best picture and sound
• Fully separated Audio, Video, Pre-Amplifiers and Power Supplies allow for a cleaner and clearer signal path
• High current two Toroidal Power Supply to drive XLRXLRXLR Pre-amplifier and Analog Audio channels
• THX Ultra2 certified
• Pre-amp, amplifier, and volume control in discrete configuration as a single component
• Discrete Devices for ultimate performance in each circuit block D.D.S..S..S.C.-HD)
• Dolby TrueHD and DTS-HD Master Audio decoders
• Audio DACs in dual differential mode 1 per audio channel) on all output channels
• To preserve original sound quality for the room's acoustics at any volume level, Audyssey Dynamic EQ loudness correction technology
• Realta sxT2 HQV processing for i/p and scaling
• Deep Color 30/36-bit) and xvYCC broader color space support
• Discrete construction and circuitry for highest quality video processing
• HDMI to HDMI scaling up to 1080p
• HD/SD video noise reduction functionality
Connectivity & Future-ready Expandability
• Network Audio and Photo Streaming
• Compressed Audio Restorer to enhance digital music files
• Music streaming from the Rhapsody music service site
• XM Ready, HD Radio built-in
Ease-of-Use
• New user interface for easy operation, setup and digital media browsing (G.U.I.).)
• GUI-assisted operation even during 1080p output from HDMI
• Dual HDMI outputs enabling simultaneous output to video projector and flat panel
• Three Analog and One Digital, Four Zone multi-source capability
• Zone 2 OSD with text, Album art is also available
• Audyssey Pro Installer Ready
• Web setup, save and load all settings via Ethernet
State-of-the-art Denon Solutions
for Maximizing Content Quality
• Sophisticated Construction for the Ultimate A/V playback
- 7 individual transformers to supply power to each discrete circuit
- Direct Mechanical Ground to minimize mechanical vibration from transformer and radiators
• Dynamic Discrete Surround Circuit, D.D.S..S..S.C.-HD
- 3 All New 32-bit floating point DSPs
- Master clock design for more accurate processing and less jitter noise
- Advanced AL24 processing provides more dynamic range
- Audio ADCs in differential mode (2 per audio channel) on all analog input channels
- DSP processing of EXT IN analog audio input is possible. Denon surround modes can also be enjoyed with external input audio signals.
• Refined calibration technology to improve a acoustical condition of any room.
- Newly improved Audyssey MultEQ XT
- New tower type microphone for more accurate measuring
- Up to eight measurement points
- New filtering ALFC (Adaptive Low Frequency Correction) for higher resolution processing in the low frequency band
• Full 10-bit processing video circuit
- Multi Cadence Detection for accurate i/p conversion
- 1080/24p pass through
- Analog video to HDMI scaling up to 1080p
- 12-bit/216-MHz video encoder and decoder with NSV
Connectivity & Future-ready Expandability • Digital Media Connectivity
- Network Audio and Photo Streaming
- Playback and control music files from PC and DLNA Servers
- AAC, WMA , MP3, FLAC, WAV file support
- Connect to over 7,000 internet radio stations
- Music streaming from the Rhapsody music service site
- JPEG Photo slideshow
- Connect to your network via Ethernet or Wi-Fi
(802.11 b/g compatible)
- Web system control via any PC on the network
- iPod audio, photo and video playback (optional ASD-1R/3R/3R/3N/3/3W)
- Mass storage support USB for audio and photo
playback (MTP compatible)
Ease-of-Use
• Ease-of-Use
- Album art support (iPod/Network/USB)
- Title text (iPod/Network/USB/XM/HD radio)
- Multi language support
- Remote control unit with GLOW-KEY buttons for easy operation in the dark
• Multi-Zone Capabilities
- Digital to analog conversion for multi-zone output
- Analog to digital conversion for multi-zone digital output (only Zone2)
- Zone 2 equipped with dedicated video decoder (+N.S.V.) and encoder
- Independent zone 2 component output
- Dual component outputs for main zone
- BNC connectors for component input/output
- IR Remote in/out ports
- +12V, 250mA trigger x 4 outputs
- RS-232C control x2
- Optional RC-7000CI/7001RCI 2-way control ready
Input / Output terminals
IN
HDMI
6
Component
6 (1: BNC)
S-Video
8
Composite
8
XLR
1
Analog audio
10
EXT. In
7.1ch
Digital OPT
5
Digital COAX
6 (2: BNC)
Denon Link 3rd
1
OUT
HDMI monitor
2
Component
main monitor
2 (1: BNC)
Zone 2 monitor
1
S-Video
REC
3
Monitor / Zone 2
1 / 1
Composite
REC
3
Monitor / Zone 2
1 / 1
Zone 3
1
Analog preout
9.3 ch XLR (Balanced)
Analog preout
9.3 ch RCA (unbalanced)
Analog audio
REC
3
Zone 2 / Zone 3
1 / 1
Digital optical
REC
2
Zone 2
1
REC / Zone 4
1
Others
Trigger +12V, 250mA
4
RS-232C
2
Control link
1
HD Radio DTU Antenna AM/FM
1 / 1
Tuner antenna AM/FM
1 / 1
Remote IN/OUT
IN 1 / OUT 1
Ethernet
1
Wi-Fi (WLAN Antenna)
1
USB
2
Dock control
1
SAT TU XM
1
Setup mic
1
Main Specifications
Pre-amplifier Section
Input sensitivity/impedance
PHONO(MM)
2.5 mV
Audio inputs
RCA (unbalanced) 200 mV/47 kohms
XLR (balanced) 400 mV/100 kohms
Output level/Load impedance
Audio outputs
RCA (unbalanced) 1.2 V
XLR (balanced) 2.4 V
FM Section
Tuning frequency range
87.5 - 107.9 MHz
Usable sensitivity
1.0 ìV (11.2 dBf)
AM Section
Tuning frequency range
520 - 1710 kHz
Usable sensitivity
19 ìV
General
Power supply
AC 120V, 60 Hz
Power consumption
2 A
(Standby: 0.3 W )
Dimensions W x H x D
434 x 214 x 488 mm
17-2/16" x 8-7/16" x 19-7/32"
Weight
26.8 kg, 59.1 lbs
POA-A1HD
• 10-channel power amp capable of driving low-impedance speakers
• 150 W x 10 channels (8 ohms), 300 W (4 ohms)
• 300 W Bridgeable derive (8 ohms), 500 W (4 ohms)
• 4 ohms guaranteed
• THX Ultra2 certified
• Fully separated construction for each 10 channels for all same audio quality
• Mono block concept to amplify with best performance
• Separate winding in power circuit for each channel
• New amplifier circuit that shortens audio signal paths for the best audio
• Direct Mechanical Ground to minimize mechanical vibration from
transformer and radiators
High Current and Separated Power Supply
• 8 individual transformers to supply power to each discrete circuit
• 4 main power transformers to drive 10 ch power amplifiers with separated coil winding for pure audio playback
• High current diodes and capacitors to drive bridged speakers
Multi-Zone Capabilities
• All channels of power amp can be assigned to various locations.
Ease-of-Use
• Optical Control Link allowing POA-A1HDCI settings to be made via the AVP-A1HDCI remote control unit (includes Control Link Cable: 3 m)
• VU meters available of any channel
Other Features
• RCA and XLR input for each channel
• Gold plated wide pitch speaker terminal
• Bi-Amp / Bridge mode select
• Trigger input
• RS-232C
�60 kg
Terminals
IN
XLR EXT.
10
RCA
10
OUT
Speaker A L/R out
10
Speaker B L/R out
10
Others
Trigger +12 V, 250 mA
1
RS-232C
1
Control link
IN 1 / OUT 1
Main Specifications
Power Amplifier Section
Rated output
150 W (8 ohms) x 10 ch
300 W (4 ohms) x 10 ch
300 W (8 ohms) x 5 ch Bridge Connection
500 W (4 ohms) x ����5 ch Bridge Connection
General
Power supply
AC 120 V, 60 Hz
Dimensions (W x H x D)
17-3/32" x 11-1/16" x 20-55/64"
434 x 297 x 530 mm
Weight
60 Kg.
Un saludo
Esta sería la combinación perfecta, segun DENON, para un procesador+ etapa AV multicanal, es grande en imagen y en precio. Si nos podemos gastar los 14000 euros que dicen que cuesta, seguramente le sacaremos partido.
No se si el maestro Kores habrá tenido oportunidad de probarlo, pero espero que de su opinión sobre este y otros "aparatejos" del apartado sonido.
las características han sido sacadas de Supersonido.
AVP-1HD
• All new circuit layouts that shorten audio and video signal paths for best picture and sound
• Fully separated Audio, Video, Pre-Amplifiers and Power Supplies allow for a cleaner and clearer signal path
• High current two Toroidal Power Supply to drive XLRXLRXLR Pre-amplifier and Analog Audio channels
• THX Ultra2 certified
• Pre-amp, amplifier, and volume control in discrete configuration as a single component
• Discrete Devices for ultimate performance in each circuit block D.D.S..S..S.C.-HD)
• Dolby TrueHD and DTS-HD Master Audio decoders
• Audio DACs in dual differential mode 1 per audio channel) on all output channels
• To preserve original sound quality for the room's acoustics at any volume level, Audyssey Dynamic EQ loudness correction technology
• Realta sxT2 HQV processing for i/p and scaling
• Deep Color 30/36-bit) and xvYCC broader color space support
• Discrete construction and circuitry for highest quality video processing
• HDMI to HDMI scaling up to 1080p
• HD/SD video noise reduction functionality
Connectivity & Future-ready Expandability
• Network Audio and Photo Streaming
• Compressed Audio Restorer to enhance digital music files
• Music streaming from the Rhapsody music service site
• XM Ready, HD Radio built-in
Ease-of-Use
• New user interface for easy operation, setup and digital media browsing (G.U.I.).)
• GUI-assisted operation even during 1080p output from HDMI
• Dual HDMI outputs enabling simultaneous output to video projector and flat panel
• Three Analog and One Digital, Four Zone multi-source capability
• Zone 2 OSD with text, Album art is also available
• Audyssey Pro Installer Ready
• Web setup, save and load all settings via Ethernet
State-of-the-art Denon Solutions
for Maximizing Content Quality
• Sophisticated Construction for the Ultimate A/V playback
- 7 individual transformers to supply power to each discrete circuit
- Direct Mechanical Ground to minimize mechanical vibration from transformer and radiators
• Dynamic Discrete Surround Circuit, D.D.S..S..S.C.-HD
- 3 All New 32-bit floating point DSPs
- Master clock design for more accurate processing and less jitter noise
- Advanced AL24 processing provides more dynamic range
- Audio ADCs in differential mode (2 per audio channel) on all analog input channels
- DSP processing of EXT IN analog audio input is possible. Denon surround modes can also be enjoyed with external input audio signals.
• Refined calibration technology to improve a acoustical condition of any room.
- Newly improved Audyssey MultEQ XT
- New tower type microphone for more accurate measuring
- Up to eight measurement points
- New filtering ALFC (Adaptive Low Frequency Correction) for higher resolution processing in the low frequency band
• Full 10-bit processing video circuit
- Multi Cadence Detection for accurate i/p conversion
- 1080/24p pass through
- Analog video to HDMI scaling up to 1080p
- 12-bit/216-MHz video encoder and decoder with NSV
Connectivity & Future-ready Expandability • Digital Media Connectivity
- Network Audio and Photo Streaming
- Playback and control music files from PC and DLNA Servers
- AAC, WMA , MP3, FLAC, WAV file support
- Connect to over 7,000 internet radio stations
- Music streaming from the Rhapsody music service site
- JPEG Photo slideshow
- Connect to your network via Ethernet or Wi-Fi
(802.11 b/g compatible)
- Web system control via any PC on the network
- iPod audio, photo and video playback (optional ASD-1R/3R/3R/3N/3/3W)
- Mass storage support USB for audio and photo
playback (MTP compatible)
Ease-of-Use
• Ease-of-Use
- Album art support (iPod/Network/USB)
- Title text (iPod/Network/USB/XM/HD radio)
- Multi language support
- Remote control unit with GLOW-KEY buttons for easy operation in the dark
• Multi-Zone Capabilities
- Digital to analog conversion for multi-zone output
- Analog to digital conversion for multi-zone digital output (only Zone2)
- Zone 2 equipped with dedicated video decoder (+N.S.V.) and encoder
- Independent zone 2 component output
- Dual component outputs for main zone
- BNC connectors for component input/output
- IR Remote in/out ports
- +12V, 250mA trigger x 4 outputs
- RS-232C control x2
- Optional RC-7000CI/7001RCI 2-way control ready
Input / Output terminals
IN
HDMI
6
Component
6 (1: BNC)
S-Video
8
Composite
8
XLR
1
Analog audio
10
EXT. In
7.1ch
Digital OPT
5
Digital COAX
6 (2: BNC)
Denon Link 3rd
1
OUT
HDMI monitor
2
Component
main monitor
2 (1: BNC)
Zone 2 monitor
1
S-Video
REC
3
Monitor / Zone 2
1 / 1
Composite
REC
3
Monitor / Zone 2
1 / 1
Zone 3
1
Analog preout
9.3 ch XLR (Balanced)
Analog preout
9.3 ch RCA (unbalanced)
Analog audio
REC
3
Zone 2 / Zone 3
1 / 1
Digital optical
REC
2
Zone 2
1
REC / Zone 4
1
Others
Trigger +12V, 250mA
4
RS-232C
2
Control link
1
HD Radio DTU Antenna AM/FM
1 / 1
Tuner antenna AM/FM
1 / 1
Remote IN/OUT
IN 1 / OUT 1
Ethernet
1
Wi-Fi (WLAN Antenna)
1
USB
2
Dock control
1
SAT TU XM
1
Setup mic
1
Main Specifications
Pre-amplifier Section
Input sensitivity/impedance
PHONO(MM)
2.5 mV
Audio inputs
RCA (unbalanced) 200 mV/47 kohms
XLR (balanced) 400 mV/100 kohms
Output level/Load impedance
Audio outputs
RCA (unbalanced) 1.2 V
XLR (balanced) 2.4 V
FM Section
Tuning frequency range
87.5 - 107.9 MHz
Usable sensitivity
1.0 ìV (11.2 dBf)
AM Section
Tuning frequency range
520 - 1710 kHz
Usable sensitivity
19 ìV
General
Power supply
AC 120V, 60 Hz
Power consumption
2 A
(Standby: 0.3 W )
Dimensions W x H x D
434 x 214 x 488 mm
17-2/16" x 8-7/16" x 19-7/32"
Weight
26.8 kg, 59.1 lbs
POA-A1HD
• 10-channel power amp capable of driving low-impedance speakers
• 150 W x 10 channels (8 ohms), 300 W (4 ohms)
• 300 W Bridgeable derive (8 ohms), 500 W (4 ohms)
• 4 ohms guaranteed
• THX Ultra2 certified
• Fully separated construction for each 10 channels for all same audio quality
• Mono block concept to amplify with best performance
• Separate winding in power circuit for each channel
• New amplifier circuit that shortens audio signal paths for the best audio
• Direct Mechanical Ground to minimize mechanical vibration from
transformer and radiators
High Current and Separated Power Supply
• 8 individual transformers to supply power to each discrete circuit
• 4 main power transformers to drive 10 ch power amplifiers with separated coil winding for pure audio playback
• High current diodes and capacitors to drive bridged speakers
Multi-Zone Capabilities
• All channels of power amp can be assigned to various locations.
Ease-of-Use
• Optical Control Link allowing POA-A1HDCI settings to be made via the AVP-A1HDCI remote control unit (includes Control Link Cable: 3 m)
• VU meters available of any channel
Other Features
• RCA and XLR input for each channel
• Gold plated wide pitch speaker terminal
• Bi-Amp / Bridge mode select
• Trigger input
• RS-232C
�60 kg
Terminals
IN
XLR EXT.
10
RCA
10
OUT
Speaker A L/R out
10
Speaker B L/R out
10
Others
Trigger +12 V, 250 mA
1
RS-232C
1
Control link
IN 1 / OUT 1
Main Specifications
Power Amplifier Section
Rated output
150 W (8 ohms) x 10 ch
300 W (4 ohms) x 10 ch
300 W (8 ohms) x 5 ch Bridge Connection
500 W (4 ohms) x ����5 ch Bridge Connection
General
Power supply
AC 120 V, 60 Hz
Dimensions (W x H x D)
17-3/32" x 11-1/16" x 20-55/64"
434 x 297 x 530 mm
Weight
60 Kg.
Un saludo