Follow along with the video below to see how to install our site as a web app on your home screen.
Se debe tener en cuenta: This feature may not be available in some browsers.
Uy! Creo que no tiene mucho sentido. Lo más probable es que en unos meses no quede casi nada. Voy a cambiar la pantalla de 100" a 120" por lo que tendré que eliminar el rack lateral y colocar los equipos bajo la pantalla, nueva ubicación de proyector... etc, etc. Si acaso pondré las fotos cuando haya terminado las modificaciones.Mike Blueberry dijo:Xalest, pon mas fotos de tu instalacion, a ver si animamos el hilo de salas y equipos![]()
destrizz dijo:Nuevo firmware para el marcado USA, ahora viene lo bueno, lo traga también nuestro gemelo europeo, confirmado en avforums.
Pasará a ser zona A???.Te animas Xalest![]()
Xalest dijo:Se agradece Destrizz. Espero que le mes que viene llegue el DTS-HD![]()
![]()
Lo tengo asumidodestrizz dijo:Lo siento Xalest, tendrás que esperar hasta mediados de junio
1. DTS-MA decoding is enabled. It works. However, there is a caveat with 7.1 systems that will likely not be fixed until the next firmware. This problem also exists with the current firmwares for the 09FD/320/23FD but was never really fully debugged for some reason by owners of said players. Basically if you have 7.1, the player upconverts all 5.1 soundtracks to 7.1 over both analog multich and HDMI. A recording I made confirms that the method used to do so is very primitive, a basic channel duplication with no matrix decoding of any sort (i.e., no DPLIIx, just a pure dupe of the surrounds for the rears). There may not be enough processing power for DPLIIx or the like, however if that is the case then the default behavior for HDMI should be 5.1 output for 5.1 soundtracks so users can enable the more advanced processing modes of their receivers. However there is not even an option to do so with this FW thus 7.1 users will be stuck with sub-optimal surround field until the next firmware unfortunately. While the method may be okay for multich analog where processors often cannot do 5.1>7.1, over HDMI pure 5.1 should be output so that we can use superior matrix decoding if the player cannot do this. IMO, a poor judgment call that will result in degraded surround field for 7.1 HDMI owners until the next firmware release. For analog multich owners there simply may not be enough processing power in the unit to perform an advanced matrixed DPLIIx decode on top of the DTS-MA, so the duplicate may be the best its going to get. Pioneer USA appears motivated to get the 5.1>7.1 HDMI issue fixed in the next firmware, however, from my understanding. Workaround for 7.1 HDMI owners is to bitstream if possible for optimal surround field until the next FW. Again, 5.1 owners are unaffected by this.
2. Star Trek dropouts are fixed. I was unable to duplicate them.
3. Standard DVD layer changes remain similar to 1.25a.
4. Overall player performance remains similar to 1.25a, maybe a bit faster but nothing groundbreaking.
5. DVD deinterlacing performance remains similar to 1.25a. Problem discs like "Noein vols 1-5" and "Family Guy vol 1" still have visible combing and/or aliasing.
6. Some of the few discs with menu lag appear to have gotten a minor speed boost, but there is still lag on some select discs as detailed in #7.
7. "An American Carol" is fixed, it no longer locks up when skipping trailers.
8. Variable crossover levels are 50/80/100/150.
9. Speaker delay times do not appear to be implemented yet.
10. Aladdin audio bug appears to be fixed, but I did not do a ton of testing on this.
I'm going to play more with the DTS-MA decoding on mis-encoded DTS titles like Die Hard 2, Pan's Labyrinth, and Harold & Kumar later to see how the player handles the mis-encoded streams. But the above info should set your expectations, at least.
The firmware was approved last night.... I am doing my best to get it posted as quick as possible (Hopefully today)...
It adds DTS-HD Master decoding, adjustable xovers, jpeg decoding, fix for some TV shows on DVD that would not display the menus, and it does allow T2 to play..
T2 does still operates slower that I would like, however this appears to be a problem on several different players (I just spend the better part of this morning trying it on several players)...
I will post again once it get up on the site...